China Dexter Trailer Axle Beam with Standard Spindles – 60″ Long – 2,000 lbs Dexter Trailer Axle Beam axle shaft

Product Description

Spherical trailer axle beam actions 60″ from hub confront to hub experience (when hubs – marketed independently – are mounted) and forty eight” from spring heart to spring centre.

 

Attributes:

  • Round axle beam functions as element of your trailer’s suspension technique
    • Exchange an axle on your trailer
    • Fabricate a suspension to fit your software
  • Substantial-toughness steel design
  • Bend in axle produces zero camber angle for even highway-to-tread get in touch with throughout the width of your trailer’s tires
    • Greatest for straight-line acceleration and constant, controlled towing
  • Underslung style – spring seats welded to underside of axle for mounting leaf springs (offered independently)
    • Reduced ride height tends to make it easier to load and unload your trailer
  • Straight spindles – no fall
    • Common grease software
  • Spring seats and spindles are welded on

 

Specs:

  • Bodyweight ability: 2,000 lbs
  • Hub-encounter-to-hub-experience length: sixty”
  • Spring-heart-to-spring-centre duration: 48″
  • Tubing outer diameter: 1-3/4″
  • Spindle measurement: 1-1/sixteen”
  • Bearings (marketed separately):
    • Interior bearing: L44649/10
    • Outer bearing: L44649/10
PN Axle Variety Rating Hub Experience to Hub Confront Spring Middle To Spring Centre Axle diameter Spindle Dimension Complete Bearings
TAB001  2,000 lbs Dexter Trailer Axle Beam 2,000 lbs. 60″ forty eight” one-3/4″ 1-1/sixteen”  Black Paint L44649/10L44649/ten

Picking THE Suitable TRAILER AXLE
When choosing an axle for your application keep in mind to take into account the subsequent essential requirements:

  • LOAD Capability:  the load rating of the axle must assistance the greatest gross motor vehicle fat ranking. For numerous axle trailers divide the GVWR by the quantity of axles to establish the minimum load capability of every single axle.

  • Monitor Duration:  measure your axle observe size by figuring out the length amongst the center of 1 tire to the centre of the other tire. A much more specific measurement can be made by measuring the length from 1 ‘HUB FACE’ to the other. The hub face is also known as the mounting surface area the place the wheel studs are found.

  • SPRING Centers:  evaluate the distance from the middle of 1 spring to the center of the other.
    Notice: not essential for substitute torsion axles

  • Overall Length:  evaluate the length from the quite stop of an axle’s spindle to the really conclude of the opposite spindle.

  • AXLE Fashion:  important when reusing previous mounting components and also for correct tire clearance. Involves straight axles (spherical or square), drop axles with offset spindles, and torsion axles. Also consider spindle dimension when reusing current hubs or drums.

  • AXLE CAMBER:  Most trailer axles are designed with a bend in the tube that will deflect when the load (fat of the trailer) is applied. This will theoretically carry the trailer wheel camber towards a worth that is the best setting for most trailer apps. This will enable the tires to use evenly and allow the longest tread existence. Camber can be affected by injury to the axle. For case in point, if the axle spindle is bent, this will normally trigger a adverse camber on that side which will trigger surplus tread put on on the within of that tire.

     

HangZhou CZPT Equipment Co., Ltd is a skilled maker of trailer components in HangZhou, ZHangZhoug Province, China since 2016.

 

We can make several trailer elements & accessories as follows: Towbars, axles, brake drums, hubs, brake disc, bearings, springs and springs and suspension kits, couplings, mudguards, U-Bolts, Jockey Wheels, keel rollers and brackets, wobble roller, wheel spacer, equalizers and all accessories related to trailers.

If you can send out me the drawings or technical specs of the trailer components, mechanical areas and wheels, we can give you our value.

Q1: Do you have manufacturing unit?
A: Indeed, we have our very own manufacturing unit, personal engineers, we can meet up with custom’s special prerequisite.

Q2: Can I have a sample get?
A: Sure, welcome sample buy to check and examine quality. Combined samples are satisfactory.

Q3: It is Alright to print my symbol on your product?
A: Indeed, we can according to your precise requirement.

This fall:How do you ship the merchandise and how long does it just take arrive?
A: We typically transported by DHL, UPS, FedEx, it usually requires 3-5 times to arrive. Airline and sea transport also optional.

Q5: What is your advantages?
A: We are professional provider for more than 10 years, we usually place the high quality and cost at the initial location. At the exact same time, our merchandise are exported to different countries, we have full expertise to remedy thorny problems.

If you want to know about our goods and us, welcome to enquiry and e mail me.thanks

one-Welcome OEM

  1. You can use your possess makes or ours, if you use our manufacturer, our professional group will aid you layout the packing.

two-Our service

  1. You inquiry related to our products or charges will be replied in 24 hrs.
  2. Nicely-trained and knowledgeable staffs to response all your enquirys in fluent English.
  3. Security of your sales region, tips of your design and style and all your personal details.
  4. We have a QC team, every merchandise will be checked by them just before packed.

three-Welcome to go to

  1. When you arrive to our organization check out us, we will prepare a vehicle for selecting up and help you book lodge. If you want to go to the local scenic place, our colleague will accompany you.

4-Guarantee

  1. Consumer must be give the online video and the photos for the issue goods.
  2. Merchandise returned inside the guarantee period of time must bear merchandise variety & date code.

five-After provider

  1. In creation and right after shipping and delivery, we will track on time and explain to you products predicament.
  2. When the merchandise arrived, if you locate any layout and top quality inquiries, or variation from your samples, remember to feel free to make contact with us, we will locate the question and fix it with you.

US $1
/ Piece
|
1 Piece

(Min. Order)

###

Condition: New
Axle Number: 2
Application: Trailer
Certification: ASTM, CE, DIN, ISO
Material: Steel
Type: Front Axles

###

Samples:
US$ 1/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

PN Axle Type Rating Hub Face to Hub Face Spring Center To Spring Center Axle diameter Spindle Size Finish Bearings
TAB001  2,000 lbs Dexter Trailer Axle Beam 2,000 lbs. 60" 48" 1-3/4" 1-1/16"  Black Paint L44649/10;L44649/10
US $1
/ Piece
|
1 Piece

(Min. Order)

###

Condition: New
Axle Number: 2
Application: Trailer
Certification: ASTM, CE, DIN, ISO
Material: Steel
Type: Front Axles

###

Samples:
US$ 1/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

PN Axle Type Rating Hub Face to Hub Face Spring Center To Spring Center Axle diameter Spindle Size Finish Bearings
TAB001  2,000 lbs Dexter Trailer Axle Beam 2,000 lbs. 60" 48" 1-3/4" 1-1/16"  Black Paint L44649/10;L44649/10

What Is an Axle?

An axle is the central shaft of a rotating wheel or gear. It can be fixed to the wheels and vehicle or may rotate freely. In many cases, the axle also includes a bearing. It is a critical part of your vehicle because it is responsible for the steering and acceleration of your vehicle. Several different types of axles are available.
Axles

Types of axles

Axles are used in various kinds of vehicles. Each type of axle carries a different load. The first kind is called the floating axle, while the second type is called the fixed axle. Both types are commonly used in light-duty vehicles and medium-duty trucks. In addition, there are different types of semi-floating axles. These axles are mainly used in trucks, light-duty pickups, and big SUVs.
A live axle transmits power from an engine to the wheels, while a dead axle does not convey power. A dead axle is also known as a lazy axle. A number of vehicles are fitted with dead axles. These axles are usually installed in front of the driving axle. However, a pusher axle is also a dead axle.
Besides being important for vehicle movement, axles are also important for suspension. These parts transfer the driving torque from the driveshaft to the wheels, which maintains the position of the wheels. They are made of durable steel, and are very hard to bend except in cases of severe impact. There are different types of axles based on their purpose: driving axles transfer engine torque to the wheels and dead axles serve as suspension components.
Floating axles have two deep groove ball bearings at each end, and are often called full floating axles. They are usually mounted in SUVs, and are more durable than regular car axles. They are also relatively inexpensive, and can support large loads. The full floating axle is usually used in heavy-duty trucks, midsize trucks, and four-wheel-drive vehicles.
Another type of axle is called a lift axle. These axles are used in Multi-Axle Vehicles, which have more than four axles. As a result, the vehicle has a greater weight capacity than a normal car. A five-axle truck has a gross vehicle weight of forty-two tons, while its kerb weight is twelve tons. Unloaded, it is therefore equal to 30 tons.
Front axles: The front axles of cars are primarily responsible for steering and processing road shocks. The front axle is made of steel that is 0.4-3% carbon steel and one-to-three percent nickel steel. Its circular or elliptical ends and I-section center help it withstand bending loads during braking. The rear axles are the drive shafts and transmit power from the differential to the rear wheels.
Rear axles are inexpensive. They connect the rear differential and can be purchased for about $150, depending on the make and model of the car. They can be found in many modern vehicles, and are commonly found in front-drive vehicles. These modern vehicles also have axle CV shafts, which are more unique than traditional axles.
In addition to tyres, the axles are responsible for transferring power from the engine to the wheels. An axle can break due to improper maintenance or a car accident, and can affect the performance of a vehicle. A damaged axle will cause it to transfer power slowly. It might also make a clunking or sputtering noise.
Axles

Cost of replacing an axle

Replacing an axle can be a costly task. A car’s axles should last between 35k and 100k miles. However, they can be damaged by hard hits or collisions. Depending on the extent of damage, the car may require a new axle or repair. The cost of an axle repair or replacement depends on several factors, including where the car was hit, the type of car and labor charges.
The cost of replacing an axle can range from around $200 to $900, depending on your vehicle and the type of work involved. Parts can be purchased for under $100 each, but you’ll also need to factor in labor, which can cost up to $200 or more. If you’re replacing both the rear and front axles, the cost will be higher than for just one axle replacement.
Axle repair is a complicated procedure, and the cost varies based on the make and model of your vehicle. A replacement axle will allow wheels to rotate freely. Depending on the severity of the problem, a front axle repair can run between $500 and $800. A rear axle repair will run you about $700.
Although an axle replacement may seem like an expensive and time-consuming task, the process will be less expensive than repairing the whole assembly. Professional mechanics can also replace one axle at a time. If you have a warranty on your car, this can cover the cost of the repair. This is a good way to save money and time while getting your car back on the road.
One of the most common causes of axle failure is the leakage of grease. When grease leaks, the CV joint is left dry, and dirt will get in. Without lubrication, this leads to increased wear, and increases the cost of axle replacement. For this reason, most mechanics will recommend replacing the entire half-shaft instead of just the axle, thereby reducing the cost and the labor time.
Depending on the severity of the damage, replacing an axle can take several hours. Aside from the repair, an alignment may be needed afterward. Most garages include this service with axle work. Depending on the type of alignment, it could cost from $20 to $150+. A complete diagnosis of the vehicle can take up to three hours to complete.
In some cases, a broken axle is completely irreparable. It will damage the rest of the vehicle and may lead to other problems. In such cases, it’s best to take it to a mechanic for repair as soon as possible. In most cases, an axle replacement should be needed just once during the life of the car.
Axles are available in pairs or individually. You can also find them at a junkyard. Installing a new axle is not difficult if you have the proper tools. An impact wrench can help make the job go faster. However, it’s important to have a flat surface for the work and wear safety gear.
Axles

Insurance coverage for repairing an axle

Car insurance may cover the costs of repairing an axle if it’s damaged in an accident, but if the damage occurred because of normal wear and tear, it may not be covered. Similarly, your insurance policy may not cover damage to tires or rims, and it might not cover the costs of a new axle, depending on the condition of the axle.
Your car’s axle is an important part of the vehicle, transferring power from the engine to the wheels. They are built to be durable, but they can bend or break due to a variety of factors, including running over a curb, hitting potholes at high speed, and auto collisions. In such cases, your car may not be able to drive, and a replacement axle may be expensive.
Some of the symptoms of an axle problem are shuddering or clicking sounds when shifting gears. Occasionally, a car may even completely stop. This can lead to an accident or even a loss of control. It’s best to fix an axle before it damages your car in an accident. In some cases, repairing the axle can cost only a few hundred dollars.
You should have your vehicle inspected for signs of wear and tear before repairing an axle. It’s crucial to take your vehicle to a mechanic immediately after an accident, as delayed repairs can lead to further suspension issues. Ideally, your vehicle’s axle should last four to five years or fifty thousand miles, although these numbers can vary. The life of an axle depends on a variety of factors, including the type of driving you do and how often you drive. Driving over rocky or icy surfaces can wear out the protective rubber boot. The rubber can also dry out and crack over time.
While the axle itself is a sturdy component, the parts connected to it are more susceptible to wear and tear. Associated components such as axle bearings are critical to the axle, as they help control the speed of the wheels when they turn. They also help maintain the integrity of the vehicle’s structural system.
Repairing an axle can be expensive, depending on the vehicle’s make and model. Depending on the severity of the problem, the costs of an axle repair can range from $500 to more than $1,000. The cost of an axle repair may also include other necessary repairs. If the damage is caused by normal use, your insurance provider may pay for the costs.
When your vehicle is in need of an axle replacement, it’s a good idea to contact a vehicle repair shop. A vehicle repair shop will give you the best possible estimate of the cost and time to repair the axle.
China Dexter Trailer Axle Beam with Standard Spindles - 60China Dexter Trailer Axle Beam with Standard Spindles - 60
editor by czh 2022-12-21