Tag Archives: gearbox car

China supplier 800UTV Gearbox Electric Car Rear Axle for Four-Wheel Drive All Terrain Vehicle with Differential Lock broken axle on car

Product Description

800UTV gearbox electric car Rear axle for a four-wheel drive all-terrain vehicle with differential lock

Product Features
This product is currently used on the rear axle of 800CC-1000CC UTV four-wheel drive all-terrain vehicles, with a differential lock.

Product Performance

Max Input Torque

T max

N.m

Max Input Rotation Rate

n max

r/min

Centre.to-centre Spacing

A

mm

Gear Ratio

U

37/10=3.7

Different types of Alxe
Usually, a car has 2 basic types of axles. One type is called a dead axle, which exists in cars to withstand the weight and does not rotate with the wheels. The other is the movable shaft connected to the wheel and pushing it. The constant velocity universal joint connects the wheel and the movable shaft so that the post can smoothly transmit power to the wheel.
In addition to dividing the axles into active or dead axles, they can also be classified into other categories, such as the front, rear, or short axles.
–Front axle
As the name suggests, the front axle is located at the front of the car. The function of the front axle is to support steering and handle impacts caused by road bumps. The front axle may be live or powered off. The active front axle can perform the work of turning the wheels as described above.
–Rear axle
The rear axle is located at the rear of the vehicle. Most rear axles are electrically charged, which means they are responsible for transmitting power to the drive wheels. The drive shaft is connected to the engine and rotates the rear axle, turning the car’s wheels.
–Short axis
The short axle of a rear-wheel drive car is connected to both ends of the front axle through a kingpin. According to the arrangement of the short shaft and its sub-components, the short shaft can be divided into 4 types:
·Elliot: This type uses a yoke, kingpin, and cotter pin to connect to the front axle.
·Reverse Elliot: This short axis is arranged in reverse with Elliot’s short axis.
·Lamoine: In Lamoine, short shafts, L-shaped mandrels, and kingpins are used instead of yokes.
·Ramon inversion: The inversion arrangement of the Ramon short axis.

Input & Output Spline Parameters

 

 

Input internal spline

Output end internal spline

Tooth system

 

 

 

modulus

m

1.25

1.05833

number of teeth

z

26

27

Pressure angle

a

20°

45°

the modification coefficient

x

 

 

Over Dimension & Weight

Weight(kg)

16.7

Length

374

AxleTrack

203

Height

220

Certificates and Honors

Packaging & Shipping

FAQ

Q: Are you trading company or manufacturer ?
A: Our group consists in 3 factories and 2 abroad sales corporations.
Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.
Q: How long is your delivery time ? What is your terms of payment ?
A: Generally it is 40-45 days. The time may vary depending on the product and the level of customization. For standard products, the payment is: 30% T/T in advance ,balance before shippment.
Q: What is the exact MOQ or price for your product ?
A: As an OEM company, we can provide and adapt our products to a wide range of needs.Thus, MOQ and price may greatly vary with size, material and further specifications; For instance, costly products or standard products will usually have a lower MOQ. Please contact us with all relevant details to get the most accurate quotation. If you have another question, please feel free to contact us.

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

After-sales Service: Installation Guide 1-Year Warranty
Condition: New
Axle Number:
Application:
Certification:
Material: Steel

axle

Where can I find information on axle load limits for various types of vehicles?

When seeking information on axle load limits for different types of vehicles, there are several reliable sources where you can find the necessary information. Here’s a detailed explanation of where you can find information on axle load limits:

1. Vehicle Owner’s Manual:

The first and most accessible source of information on axle load limits is the vehicle owner’s manual. The owner’s manual provided by the vehicle manufacturer typically includes important details about the vehicle’s specifications, including axle load limits. Look for sections related to vehicle loading, weight distribution, or axle specifications to find the recommended load limits for each axle of your specific vehicle model.

2. Government Transportation Authorities:

Government transportation authorities, such as departments of transportation or road transport authorities, often provide guidelines and regulations regarding vehicle weight limits, including axle load limits. These authorities establish and enforce weight restrictions to ensure road safety and prevent damage to infrastructure. Visit the website of your local or national transportation authority to access relevant regulations or guidelines pertaining to axle load limits for various types of vehicles.

3. Commercial Vehicle Regulations:

If you are specifically interested in axle load limits for commercial vehicles, such as trucks or buses, consult the commercial vehicle regulations applicable in your region. These regulations are established to ensure safe and efficient operation of commercial vehicles on public roads. Regulatory bodies responsible for commercial vehicle operations often provide detailed information on axle load limits, weight distribution requirements, and other related specifications.

4. Vehicle Manufacturer or Dealer:

If you require axle load limit information for a specific vehicle model or variant, contacting the vehicle manufacturer or a local authorized dealer can be helpful. They can provide accurate and up-to-date information specific to your vehicle. Provide them with the vehicle identification number (VIN) or other relevant details to ensure they can assist you accurately.

5. Online Resources and Databases:

There are online resources and databases dedicated to providing information on vehicle specifications, including axle load limits. These resources may include vehicle data websites, forums, or government databases that compile and provide access to vehicle specifications and regulatory information. Conduct an internet search using relevant keywords to find reliable online sources that offer information on axle load limits for various types of vehicles.

When seeking information on axle load limits, it’s crucial to ensure that the information you obtain is accurate, up-to-date, and applicable to your specific vehicle and jurisdiction. Regulations and load limits can vary depending on the country, region, vehicle type, and other factors. Therefore, it is advisable to consult official sources or seek professional advice to ensure compliance with applicable regulations and ensure safe and legal operation of your vehicle.

axle

Are there specific maintenance tips to extend the lifespan of my vehicle’s axles?

Maintaining the axles of your vehicle is crucial for ensuring their longevity, performance, and overall safety. Here are some specific maintenance tips to extend the lifespan of your vehicle’s axles:

  1. Regular Inspection:
  2. Perform regular visual inspections of the axles to check for any signs of damage, leaks, or excessive wear. Look for cracks, bends, or rust on the axle housing, and inspect the axle shafts, seals, and boots. Early detection of issues can help prevent further damage and costly repairs.

  3. Lubrication:
  4. Follow the manufacturer’s recommendations for axle lubrication. Proper lubrication helps reduce friction and wear on the axle components. Regularly check the axle’s lubricant level and quality, and replace it as necessary. Use the recommended lubricant type and viscosity for your specific axle.

  5. Seal Inspection and Replacement:
  6. Check the axle seals for any signs of leaks, such as fluid accumulation around the axle ends. Leaking seals can allow contaminants to enter the axle assembly, leading to premature wear and damage. Replace worn or damaged seals promptly to maintain proper lubrication and prevent contamination.

  7. Proper Loading and Towing:
  8. Ensure that you do not exceed the weight capacity of your vehicle’s axles. Overloading or towing beyond the recommended limits can put excessive stress on the axles, leading to premature wear or failure. Be mindful of the payload and towing capacity specified by the vehicle manufacturer.

  9. Driving Techniques:
  10. Adopt proper driving techniques to minimize stress on the axles. Avoid sudden acceleration, aggressive cornering, and harsh braking, as these actions can subject the axles to excessive forces. Additionally, be cautious when driving over rough terrain or obstacles to prevent impacts that could damage the axles.

  11. Regular Wheel Alignment:
  12. Maintain proper wheel alignment to prevent excessive strain on the axles. Misaligned wheels can put uneven loads on the axles, leading to accelerated wear. Regularly check and adjust the wheel alignment as per the manufacturer’s recommendations.

  13. Proper Tire Inflation:
  14. Ensure that your vehicle’s tires are properly inflated according to the recommended tire pressure. Underinflated or overinflated tires can affect the load distribution on the axles and increase the risk of axle damage. Regularly check and maintain the correct tire pressure.

  15. Service Intervals:
  16. Follow the recommended service intervals for your vehicle, which may include axle inspections, lubricant changes, and other maintenance tasks. Adhering to these intervals ensures that the axles are properly maintained and any potential issues are addressed in a timely manner.

It’s important to consult your vehicle’s owner’s manual for specific maintenance guidelines and intervals provided by the manufacturer. Additionally, if you notice any unusual noises, vibrations, or handling issues related to the axles, it is advisable to have your vehicle inspected by a qualified mechanic to identify and address any potential axle problems promptly.

axle

Are there aftermarket axles available for upgrading performance in off-road vehicles?

Yes, there are aftermarket axles available for upgrading performance in off-road vehicles. Off-road enthusiasts often seek aftermarket axle options to enhance the durability, strength, and performance of their vehicles in rugged and demanding terrains. Here’s some information about aftermarket axles for off-road applications:

1. Upgraded Axle Materials:

Aftermarket axles are typically made from high-strength materials such as chromoly steel or forged alloys. These materials offer superior strength and durability compared to stock axles, making them better suited for off-road use where extreme loads, impacts, and torsional forces are encountered.

2. Increased Axle Shaft Diameter:

Some aftermarket axles feature larger diameter shafts compared to stock axles. This increased diameter helps improve the axle’s load-carrying capacity and resistance to bending or torsion. It can also enhance the overall durability and reliability of the axle in off-road conditions.

3. Upgraded Axle Splines:

Axles with upgraded splines are designed to handle higher torque loads. Aftermarket axles may feature larger and stronger splines, providing increased power transfer capabilities and reducing the risk of spline failure, which can occur in extreme off-road situations.

4. Locking Differentials:

Some aftermarket axle options include integrated locking differentials. Locking differentials improve off-road traction by mechanically locking both wheels on an axle together, ensuring that power is distributed evenly to both wheels. This feature can be advantageous in challenging off-road conditions where maximum traction is required.

5. Lifted Vehicle Compatibility:

Aftermarket axles are often designed to accommodate lifted vehicles. Lift kits that raise the suspension height can impact the axle’s operating angles. Aftermarket axles may offer increased articulation or modified geometry to maintain proper alignment and reduce the risk of binding or premature wear.

When considering aftermarket axles for off-road vehicles, it’s essential to choose options that are compatible with your specific vehicle make, model, and suspension setup. Working with reputable manufacturers, consulting with experienced off-road enthusiasts, or seeking advice from professional mechanics can help you select the most suitable aftermarket axle upgrades for your off-road needs.

Lastly, it’s important to keep in mind that upgrading axles alone may not be sufficient for maximizing off-road performance. Other components such as suspension, tires, differential gears, and drivetrain systems should be considered as part of a comprehensive off-road build to ensure optimal performance, reliability, and safety.

China supplier 800UTV Gearbox Electric Car Rear Axle for Four-Wheel Drive All Terrain Vehicle with Differential Lock   broken axle on carChina supplier 800UTV Gearbox Electric Car Rear Axle for Four-Wheel Drive All Terrain Vehicle with Differential Lock   broken axle on car
editor by CX 2024-04-10