Product Description
200kg 300kg capacity 1 person trailed towable aerial man lifts
GERMANY ALKO AXLES MEET EU TRAFFIC STHangZhouRD ROAD+ALKO BRAKES SYSTEM
Introduction:
Trailing Cherry Picker articulated boom lfit is 1 of the most ideal aerial lift platforms for both indoors and outdoors maintenance work. It can rotate 360degree in the air and the platform height is from 6m to 16m. It can be used in a tight space because of its company structure. It is very easy and convenient to be trailed by car or tractor anywhere. It is widely used in neighborhood units, road light maintenance, factories high place maintenance, construction site, and so on.
Towable Boom Lift is famous for its wide working range. Firstly, it can be towed by tractor, truck or car for long-distance. Secondly, because of its bending arm, the towable boom lift can reach not only vertical high places but also horizontal distance. Thirdly, the towable boom lift is equipped with an automatic turntable plate which can rotate the arm 360°. All these characteristics make sure the wide working range.
Four high-strength hydraulic automatic support legs will jack up the whole body of the towable boom lift when working, which will guarantee the great stability of the whole machine. Considering the 4 high-strength support legs, it has a nickname called “Spider Boom Lift”.
There are 3 control panels on the towable boom lift:
Four support legs control panels
Lifting and Rotating control panel on the body
Lifting and rotating controls on the platform
The operator can control the towable boom lift no matter he is on the ground rather than on the platform.
Towable Boom Lift has 3 kinds of power supply for choice:
Diesel power with diesel engine
Battery power with an electric motor
Both diesel power and battery power
It depends on customers’ preferences.
Configurations:
Retractor
Support Wheel
Four Hydraulic Support Legs
Support Legs Control Handle
Lifting Control Panel on the Body
Diesel Engine
Electric Motor
Hydraulic Pump Station
Hydraulic Cylinder
Basket
Lifting Control Panel on the Busket
Siren
Product Features:
1.360degrees rotation of the arm
2.Sealing parts use the JapanNOK brand, guarantee that the products run 300,000 times without leakage or damage
3.Cylinder outlet is equipped with automatic shut-off valve
4.Equipped with emergency dropping device
5.The machine has two sets of control system, one on the machine, one on the floor, easy and convenient to operate, safe and flexible
6.The rotating parts are equipped with lubricated bearing and grease cup,flexible rotation without noise
7.Equipped with sliding track rollers, reducing the rocking and vibration and ensures the smooth up-down
| Model Type | TBL-10A | TBL-12A | TBL-14A +Telescopic |
TBL-16A +Telescopic |
TBL-18A +Telescopic |
TBL-20A +Telescopic |
| Lifting height | 10M | 12M | 14M | 16M | 18M | 20M |
| Working height | 12M | 14M | 16M | 18M | 20M | 22M |
| Load capacity | 200KG | |||||
| Platform size | 0.9*0.7M | |||||
| Working radius | 5.5M | 6.5M | 8.5M | 10.5M | 11M | 11M |
| Net Weight | 1855KG | 2050KG | 2500KG | 2800KG | 2800KG | 2800KG |
| Overall Size( L*W*H) | 5.2*1.7*2.1M | 6.2*1.7*2.1M | 5.6*1.7*2.1M | 5.7*1.7*2.2M | 6.5*1.8*2.3M | 5.8*1.9*2.3M |
| Supporting Legs Stride Distance(Horizontal) | 3.0 M | 3.6 M | 3.6 M | 3.9 M | 3.9 M | 3.9 M |
| Supporting Legs Stride Distance (Vertical) | 4.7 M | 4.7 M | 4.7 M | 4.9 M | 4.9 M | 4.9 M |
| Wind Resistance Level | <=5 | |||||
| 20’/40′ Container Loading Quantity | 20’/1set | 20’/1set | 20’/1set | 20’/1set | 20’/1set | 20’/1set |
| 40’/3sets | 40’/2sets | 40’/2sets | 40’/2sets | 40’/2sets | 40’/2sets | |
Optional Power:
1.Diesel
2.Battery engine-Europe Bucher
3.Gasoline engine-Japa Honda
4. AC Electricty power
5. Hybrid power,optional dual power
Safety Precautions:
1. Explosion-proof valves: protect hydraulic pipe, anti-hydraulic pipe rupture.
2. Spillover valve: It can prevent high pressure when the machine moves up. Adjust the pressure.
3. Emergency decline valve: it can go down when you meet an emergency or the power off.
4. Anti-dropping device: Prevent falling of platform
Trailed Boom Lift Detailed Pictures:
Certificate:ISO and CE,SGS,ROHS,ETC.
Our Service:
1.We can design the customerized towable boom lift as per your requirement.
2.The most suitable model will be recommended to you once we know about your requirement.
3.Shipment can be arranged from our port to your destination port.
4.Opetion video can be sent to you if needed.
5.Maintenance video will be given once the towable boom lift break down to help you repair.
6.Parts of towable boom lift can be sent to you by express within 7 days if needed.
Frequently Asked Questions:
1.How can customer buy parts once it break down?
The towable boom lift adopt most of the common parts of hardware.You can buy the parts in your local hardware market.
2.How can customer repair the towable boom lift.
One of the great advantage of the equipment is with very very low failure rate.Even it breaks down,we can CZPT to repair it by video and repair instruction.
3.How long is the quality guarantee?
One year quality guarantee.If it breask down within 1 year,we can send the parts free of charge to you.
Contact Information:
Alison (Sales Manager)
HangZhou Sinofirst Machinery Co., Ltd.
Add: DHangZhou Industrial Park, CHangZhou, HangZhou China
| After-sales Service: | Free Parts |
|---|---|
| Warranty: | 2year |
| Application: | Workshop Crane, Shipboard Crane, Warehouse Crane, Building Crane, Facotry |
| Samples: |
US$ 4000/Piece
1 Piece(Min.Order) | Order Sample |
|---|
| Customization: |
Available
| Customized Request |
|---|
.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}
|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
|
Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
What are the safety considerations when working with axles, especially during repairs?
Working with axles, especially during repairs, requires careful attention to safety to prevent accidents and injuries. Here are some important safety considerations to keep in mind when working with axles:
1. Personal Protective Equipment (PPE):
Wear appropriate personal protective equipment, including safety goggles, gloves, and steel-toed boots. PPE helps protect against potential hazards such as flying debris, sharp edges, and accidental contact with heavy components.
2. Vehicle Stability:
Ensure that the vehicle is on a stable and level surface before working on the axles. Engage the parking brake and use wheel chocks to prevent unintended vehicle movement. The stability of the vehicle is crucial to maintain a safe working environment.
3. Lifting and Support:
Use proper lifting equipment, such as hydraulic jacks or vehicle lifts, to raise the vehicle safely. Follow the manufacturer’s guidelines for lifting points and weight capacities. Once the vehicle is lifted, support it securely with jack stands or other appropriate supports to prevent it from falling or shifting during repairs.
4. Lockout/Tagout:
If the repair work involves disconnecting or removing any electrical or mechanical components that could cause the axle or wheels to move, follow lockout/tagout procedures. This involves locking and tagging out the power source, so it cannot be accidentally energized while work is being performed.
5. Proper Tools and Equipment:
Use the correct tools and equipment for the job. Using improper tools or makeshift methods can lead to accidents and damage to the axle or surrounding components. Follow the manufacturer’s instructions and recommended procedures for disassembling, repairing, and reassembling the axle.
6. Proper Torque and Tightening:
When reassembling the axle components, use a torque wrench to ensure that fasteners are tightened to the manufacturer’s specifications. Over-tightening or under-tightening can lead to component failure or damage. Follow the recommended torque values provided by the vehicle manufacturer.
7. Safe Handling of Heavy Components:
Axle components can be heavy and cumbersome. Use appropriate lifting techniques and equipment, such as hoists or lifting straps, to safely handle heavy axle parts. Avoid lifting heavy components alone whenever possible and ask for assistance when needed.
8. Proper Disposal of Fluids and Waste:
If the repair involves draining fluids from the axle, such as differential oil, ensure proper disposal according to local regulations. Use appropriate containers to collect and store fluids and dispose of them at authorized collection points.
9. Training and Experience:
Working with axles requires knowledge and experience. If you are unfamiliar with axle repairs, consider seeking assistance from a qualified mechanic or technician who has the necessary training and expertise. If you decide to perform the repairs yourself, ensure that you have the appropriate knowledge and skills to carry out the task safely.
By following these safety considerations, you can help minimize the risk of accidents, injuries, and damage when working with axles, ensuring a safe working environment for yourself and others involved in the repair process.
Where can I purchase high-quality replacement axles for my make and model of vehicle?
When it comes to purchasing high-quality replacement axles for your specific make and model of vehicle, there are several reliable sources you can consider. Here are some options:
- Authorized Dealerships:
- Independent Auto Parts Stores:
- Online Retailers:
- Specialty Performance Retailers:
- Local Salvage Yards:
- Vehicle Manufacturer’s Online Parts Store:
Authorized dealerships of your vehicle’s manufacturer are a trustworthy option for purchasing replacement axles. They offer genuine parts that are specifically designed and engineered for your make and model. Contact your local dealership’s parts department to inquire about the availability of replacement axles.
Independent auto parts stores often carry a wide range of replacement axles from reputable manufacturers. These stores typically have knowledgeable staff who can help you identify the correct axle for your vehicle. Examples of popular auto parts stores include AutoZone, Advance Auto Parts, and O’Reilly Auto Parts.
Online retailers provide a convenient way to browse and purchase replacement axles from the comfort of your home. Websites such as Amazon, eBay, and RockAuto offer extensive selections of axles for various vehicle makes and models. Be sure to verify the compatibility of the axles with your specific vehicle before making a purchase.
If you are looking for high-performance or upgraded axles, specialty performance retailers may be the way to go. These retailers cater to enthusiasts and offer axles that are designed to handle increased power, torque, or off-road demands. Examples of specialty performance retailers include Summit Racing, Jegs, and 4 Wheel Parts.
Salvage yards, also known as junkyards or auto recyclers, can be a cost-effective option for finding used axles in good condition. Some salvage yards have an inventory system that allows you to search for specific parts based on your vehicle’s make and model. It’s important to thoroughly inspect used axles before purchase to ensure they meet your requirements.
Many vehicle manufacturers have their own online parts stores where you can directly purchase genuine replacement parts, including axles. These online stores provide the assurance of authenticity and compatibility with your specific make and model. Visit the official website of your vehicle’s manufacturer and look for their parts store section.
When purchasing replacement axles, it’s important to prioritize quality and ensure that the parts meet or exceed the original equipment specifications. Consider factors such as warranty coverage, customer reviews, and the reputation of the manufacturer or retailer. Additionally, consult with knowledgeable professionals or refer to your vehicle’s owner’s manual for specific axle specifications and recommendations.
Are there aftermarket axles available for upgrading performance in off-road vehicles?
Yes, there are aftermarket axles available for upgrading performance in off-road vehicles. Off-road enthusiasts often seek aftermarket axle options to enhance the durability, strength, and performance of their vehicles in rugged and demanding terrains. Here’s some information about aftermarket axles for off-road applications:
1. Upgraded Axle Materials:
Aftermarket axles are typically made from high-strength materials such as chromoly steel or forged alloys. These materials offer superior strength and durability compared to stock axles, making them better suited for off-road use where extreme loads, impacts, and torsional forces are encountered.
2. Increased Axle Shaft Diameter:
Some aftermarket axles feature larger diameter shafts compared to stock axles. This increased diameter helps improve the axle’s load-carrying capacity and resistance to bending or torsion. It can also enhance the overall durability and reliability of the axle in off-road conditions.
3. Upgraded Axle Splines:
Axles with upgraded splines are designed to handle higher torque loads. Aftermarket axles may feature larger and stronger splines, providing increased power transfer capabilities and reducing the risk of spline failure, which can occur in extreme off-road situations.
4. Locking Differentials:
Some aftermarket axle options include integrated locking differentials. Locking differentials improve off-road traction by mechanically locking both wheels on an axle together, ensuring that power is distributed evenly to both wheels. This feature can be advantageous in challenging off-road conditions where maximum traction is required.
5. Lifted Vehicle Compatibility:
Aftermarket axles are often designed to accommodate lifted vehicles. Lift kits that raise the suspension height can impact the axle’s operating angles. Aftermarket axles may offer increased articulation or modified geometry to maintain proper alignment and reduce the risk of binding or premature wear.
When considering aftermarket axles for off-road vehicles, it’s essential to choose options that are compatible with your specific vehicle make, model, and suspension setup. Working with reputable manufacturers, consulting with experienced off-road enthusiasts, or seeking advice from professional mechanics can help you select the most suitable aftermarket axle upgrades for your off-road needs.
Lastly, it’s important to keep in mind that upgrading axles alone may not be sufficient for maximizing off-road performance. Other components such as suspension, tires, differential gears, and drivetrain systems should be considered as part of a comprehensive off-road build to ensure optimal performance, reliability, and safety.
editor by CX 2023-11-08